Description  PENTENS AB-BOND  is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete and mortar to prevent water infiltration.     Technical & Physical Data  Tensile Strength (kgf/cm2) (ASTM D412 (Die C) 8.3 Elongation (%) ..

Description  PENTENS AB BRUSH is a cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete to prevent water infiltration & low VOC. PENTENS AB BRUSH can be used: potable water tanks, basements, retaining walls, seawalls, terraces and balconies, RC gutters, bathroom floors and walls..

Description  PENTENS AD-BOND LATEX cement modifier is belonged to the copolymer of styrene, being modified from MMA, and butadiene. When added into cement and mortar, it will permeate into the gap between cement and aggregate, that will create finer texture in cement and mortar and further enhance waterproofing and durability for cemen..

PENTENS BITUFLEX 101 is a low viscosity blend of water-based bituminous specially formulated to produce a tough and durable bituminous film when dry. It is a single-component newly-developed polymer of MMA, natural rubber and polyurethane combined with asphalt and then modified and further emulsified to form an elastic waterproof membrane. Techn..

PENTENS CIM-WATERPROOFER is concrete and mortar waterproofing admixture. Modified polymer liquid admixture that acts as a highly efficient platiciser and waterproofing agent. Technical Physical Data   Form Liquid Appearance Black Coffee Specific Gravity Typical 1.10 at 20˚C F..

PENTENS DR. WALL is a rich combination of organic and inorganic chemical composition plus specific modification of quartzsand, cement and concrete. A special formula design for the construction surface layer (paint layer). ADVANTAGES • Easy to apply, can be directly coated on the damp surface. • High water resistance. • S..

Description  PENTENS DRAIN CLOG-FREE RENOVATOR is specially formulated to dislodge layers of hair, soap scum, grease and organic slime in drains and pipes accumulated over a period of time by liquifying them and restoring free flow to choked drains. It is highly effective for removing clogs and maintaining free flow in sink traps and d..

PENTENS E-GROUT is a 2-component pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, brickwork, masonry or for wall and slab bedding bearing pads. Description  PENTENS E-GROUT is a 2-component pre-packed epoxy mortar based on epoxy resin for the bonding and repair of cracked concrete, br..

Description  PENTENS EasyCoat WP1+ is a one-component water-based flexible cementitious waterproofing system and easy to apply. As the intermediate coating of waterproof material. Have leveling effect for the work surface is not flat such as crack, gap. Increase the thickness of the waterproofing layer, strengthen the work surface.&nbs..

PENTENS FLESEAL T-200 is based on a newly developed acrylic polymers which dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. PENTENS FLESEAL T-200 is an environmentally friendly and low VOC material. It takes the majority of the heat load off a building’s exterior walls and reduces temperat..

PENTENS FLEX-609 single component polyurethane, cures to form a soft elastomeric weatherproof seal and it is specifically designed for waterproofing and sealing of external and internal expansion and construction joints in buildings and engineering structures.   Advantages Single component, easy to apply Good ..

PENTENS LATEX-108 is a one-component acrylicbased liquid resin mixed with normal Portland cement mortar or white cement which is used as flexible adhesive, patching mortar, base coat etc. Technical & Physical Data  Form Liquid Colour Milky white Density (CNS 6986, CNS 6988) 1.02 ..

Description  PENTENS SLATE-SEAL 820 is a specially formulated colourless protective coating with added Ultra Violet (UV) additive for the treatment of interior and exterior concrete surfaces against scratching. PENTENS SLATE-SEAL 820 suited for slate, quarry and paver tiles, stamped concrete and concrete tile.  Technical &..

Description PENTENS Slate-Seal 821 Water-based Transparent Protecting Acrylic Coating is suitable to be used for natural stones, external walls, tiles, brickworks, concrete structure protective coatings and etc.   Technical & Physical Data Form Liquid Color Transparent Finish Semi..

Description  PENTENS SOLAR FLEX T-202 is a single component, water-based, ready-mixed, acrylic-based, course textured decorative and protective coating finish over prepared concrete, masonry and steel structures.     Technical & Physical Data  Form Thick Liquid Colour Whi..